Underwater Acoustic Sensor Networks (UW-ASN)




 
 
Project
Overview

 
 
BWN-Lab
Personnel

 
 
Project
Description

 
 
Publications

 
 
BWN-Lab
Research Projects 

 
You are visitor

since 11/10/2004

Overview

Ocean bottom sensor nodes are deemed to enable applications for oceanographic data collection, pollution monitoring, offshore exploration, disaster prevention, assisted navigation and tactical surveillance applications. Multiple Unmanned or Autonomous Underwater Vehicles (UUVs, AUVs), equipped with underwater sensors, will also find application in exploration of natural undersea resources and gathering of scientific data in collaborative monitoring missions. To make these applications viable, there is a need to enable underwater communications among underwater devices. Underwater sensor nodes and vehicles must possess self-configuration capabilities, i.e., they must be able to coordinate their operation by exchanging configuration, location and movement information, and to relay monitored data to an onshore station.

Wireless underwater acoustic networking is the enabling technology for these applications. UnderWater Acoustic Sensor Networks (UW-ASN) consist of a variable number of sensors and vehicles that are deployed to perform collaborative monitoring tasks over a given area. To achieve this objective, sensors and vehicles self-organize in an autonomous network which can adapt to the characteristics of the ocean environment.
Underwater networking is a rather unexplored area althoughunderwater communications have been experimented since World War II, when, in 1945, an underwater telephone was developed in the United States to communicate with submarines. Acoustic communications are the typical physical layer technology in underwater networks. In fact, radio waves propagate at long
distances through conductive sea water only at extra low frequencies (30-300 Hz), which require large antennae and high transmission power. Optical waves do not suffer from such high
attenuation but are affected by scattering. Moreover, transmission of optical signals requires high precision in pointing the narrow laser beams. Thus, links in underwater networks are based on  acoustic wireless communications.

The traditional approach for ocean-bottom or ocean column monitoring is to deploy underwater sensors that record data during the monitoring mission, and then recover the instruments. This approach has the following disadvantages:
  • Real time monitoring is not possible. This is critical especially in surveillance or in environmental monitoring applications such as seismic monitoring. The recorded data cannot be accessed until the instruments are recovered, which may happen several months after the beginning of the monitoring mission.
  • No interaction is possible between onshore control systems and the monitoring instruments. This impedes any adaptive tuning of the instruments, nor is it possible to reconfigure the system after particular events occur. 
  • If failures or misconfigurations occur, it may not be possible to detect them before the instruments are recovered. This can easily lead to the complete failure of a monitoring mission. 
  • The amount of data that can be recorded during the monitoring mission by every sensor is limited by the capacity of the onboard storage devices (memories, hard disks, etc.).


Therefore, there is a need to deploy underwater networks that will enable real time monitoring of selected ocean areas, remote configuration and interaction with onshore human operators. This can be obtained by connecting underwater instruments by means of wireless links based on acoustic communication.


Many researchers are currently engaged in developing networking solutions for terrestrial wireless ad hoc and sensor networks. Although there exist many recently developed network protocols for wireless sensor networks, the unique characteristics of the underwater acoustic communication channel, such as limited bandwidth capacity and variable delays, require for very efficient and reliable new data communication protocols.

Major challenges in the design of underwater acoustic networks are:
  • Battery power is limited and usually batteries can not be recharged, also because solar energy cannot be exploited; 
  • The available bandwidth is severely limited;
  • Channel characteristics, including long and variable propagation delays, multi-path and fading problems; 
  • High bit error rates; 
  • Underwater sensors are prone to failures because of fouling, corrosion, etc.



Point measurements in upper water column 10 and 25 mi off Moss Landing.
http://www.mbari.org/aosn/





Drift buoy: Path followed by surface currents.
http://www.mbari.org/aosn/